 |
 |
 |
 |
 |
 |
 |
Rhea phono stage—the ultimate combination with our Calypso line stage, dedicating separate power supplies and chassis for line and phono functions. Ideal for audio or home cinema systems using integrated amplifiers, separate line stages, or surround sound / processor preamps.
• Each input can have its own gain and loading setting that is saved even when in standby mode.
• 40–75dB gain maximum, selectable via front panel or remote control.
• 9 MC loading settings: 75–47,000 ohms, selectable via front panel or remote control.
• Remote control of gain, loading, input switching, mute, and demagnetizer.
• Built-in MC cartridge demagnetizer.
• Two sets of XLR and two sets of RCA outputs per channel.
• All tube amplification and output (10 tubes total).
• Full function remote included.
Specification
inputs: 3 discrete phono inputs with RCA (SE)
gain settings (selectable for each input): 8 total; 75, 68, 62, 56, 50, 44, 38 dB, and off
load settings (selectable for each input): 9 total: 47 K ohms, 10K, 5K, 2.5K, 1K, 500 ohms, 250, 125, and 75 ohms
outputs: 2 RCA (SE) and 2 XLR (balanced)
output impedence: 300 ohms RCA (SE), 600 ohms XLR (balanced)
front panel controls: phono input, mute, gain, loading, demagnetizer, and standby
remote controls: phono input, mute, gain, loading, demagnetizer, and standby
frequency response: +- 0.25 dB, 20 Hz – 20 KHz
signal to noise: measured at 70 dB minimum A-weighted (ref 1 mv input, 75 dB gain setting)recommended load: 10 k ohms or greater
tubes (each channel): V1 & V2 (12AX7LP–factory graded low noise), V3 & V4 (12AX7 or equivalent) and V5 (6922)
power consumption: 20 watts standby, 100 watts active
physical dimensions: 4 3/8" high, 17 7/8" wide, 18" deep including jacks
shipping weight: 40 lbs.
Atlas • Jupiter Series • Janus • Saturn Series • Calypso • Demagnetizer
